750W Electric Hydraulic Pump with Manual Valve (Red)

The pump can be used for a variety of hydraulic devices. If the pump is equipped with other hydraulic tools it can work in several tasks such as lifting, pressing, folding, steering, cutting, assembly and disassembly. Reduce manual labor and maximize work efficiency. Cutting machine bending hydraulic products Jack Split Operating mode: manual valve controls oil return ✔ Our products are shipped from local warehouses. We transport by DHL/YDEL/UPS... ✔ If you have any problem please feel free to contact us. We will serve you within 24 hours. Specifications Input voltage: AC 220V 50Hz. Flow rate: 0 6 l/min (> 7 MPa) - 5 l/min (<7 MPa)

Operating pressure: 290 psi - 10152 psi (2 Mpa - 70 MPa). Oil capacity: 7 l. Motor power: 750 W. Motor rotation speed: 1400 rpm. Dimensions de la machine : 25 x 32 5 x 50 cm. Poids net : 21 5 kg. G.W. 22 89 kg. Instructions for use (French no 1. Open the filling spout before using the electric pump and power connections before oiling then press the black button on the side of the motor to open down press the manual operation switch (up) press the manual operation switch (down) after a few air presses press the manual operation switch (down) turn off the motor connected to the hose. (The air pressure should not exceed 63 MPa to avoid damage).

2. Open the engine after connecting the pump to the equipment, and turn the operating valve to the pressure position after running the engine for 1-2 minutes. At this time the hydraulic oil comes into the cylinder to do the work and the output of the hydraulic oil will increase up to 63 MPa. 3. The normal working temperature of the oil pump is between 10°C~50°Cif the oil temperature ≥70°C after continuous use under high pressure let it cool down yourself before use.

4. The pressure of the relief valve and safety valve has been adjusted before the pump leaves the factory. The user cannot increase the pressure arbitrarily, he can only reduce the pressure according to the actual working pressure, which can extend the service life of the pump station. 5. The motor must be reliably grounded. Content 1 hydraulic pump with electric drive. 1 oil pipe (1.8 m). 1 quick holster.